DIY pillowcases

May 31, 2015

My kids’ pillows always end up out of their pillowcases by morning, so I decided to make them some fun envelope style pillowcases.  Fleece was also on sale at Joann’s for 60% off, which helped motivate me to get my sewing machine back out after a long hiatus.

(Please excuse the terrible photo quality and angles.  It was nighttime and I only had my cell phone camera, but you get the idea!)

From this cute fabric

fabric

to these cute pillows that won’t fall out by morning.

pillows

Note: There’s another way to make envelope pillows where the fold is on the inside, but I prefer the look of this way.  Plus, my kids are less likely to stuff random things inside when the envelope is the way I describe below.

Step 1: Measure your pillow and cut your fabric

Each pillowcase takes 1 yard of fabric.  I discovered there wasn’t really a standard size pillow, so I measured the ones that my kids currently use, which used to be on our bed and are a different size than our new ones.  Weird, right?  Any way, the ones on their bed are about 17.5″ x 26″.

After washing, the fleece I bought was about 40″ wide and 35″ long.  I folded this in half hot dog style (yes, I used to teach middle school) and cut 2″ off the selvedge edges so the fabric was 36″ wide.  Then I trimmed the bottom of the fabric so it was 34″ long.

Now, cut 7.5″ on the folded seam and cut out that rectangle, so one side is 26.5″ long.

Step 2: Hem

On the shorter side, cut 1/2″ on the half seam line and hem this.  On the longer side, fold over 1/2″ and then another 1/2″ so that the cut edge doesn’t show.  Hem this.  At this point, the shorter side is 26″ long and the other side is 33″ long.  One of the great things about fleece is that it doesn’t fray, so you don’t have to worry about serging or zig zag stitching the raw edges.  I do like the look of a finished edge on the part of the envelope that will show.

step 2

Step 3: Fold and Sew

Fold the long side up so both sides are even.  You should have a rectangle that is 36″ x 26″.

step 3a

Then fold this in half right sides together so you have a rectangle that is 18″ x 26″.  Now you’re going to sew a 1/2″ hem around 3 sides (not the side with the envelope opening).  Yes, you do have to hem the side that was folded because this keeps in the envelope in.  Your pillowcase is now 17″ x 25.5″, which is a tiny bit smaller than the pillow so it fills out nicely.

step 3b

Step 4: Flip and Stuff

Flip your pillowcase rightside out and put the pillow in.  Ta da!

finished pillow

Advertisements